Harley Davidson Pan America Forum banner
1 - 3 of 3 Posts

·
Registered
Joined
·
19 Posts
Discussion Starter · #1 ·
Has anyone had the engine breather line come off because of the engine can’t vent and blows a fine mist of oil down the side of your bike. I found this on a road trip. I discovered mine is plugged at the velocity stack fitting, came from manufacture like that. Changing a/f to the s/e hi-flow filter. Any thoughts?
 

·
Registered
Joined
·
155 Posts
Has anyone had the engine breather line come off because of the engine can’t vent and blows a fine mist of oil down the side of your bike. I found this on a road trip. I discovered mine is plugged at the velocity stack fitting, came from manufacture like that. Changing a/f to the s/e hi-flow filter. Any thoughts?
The air flow differences for the SE filters are as shown in the HD Parts book:
Font Paper Document Paper product Menu

With a higher-flow muffler and mid-pipe, with the dB-killer removed, I'd recommend the extreme-flow air filter. That's what I have installed and have a been happy with it.
 

·
Registered
Joined
·
19 Posts
Discussion Starter · #3 ·
I have the extreme flow filter and will be installing it and a Vance and Hines muffler for a little extra fun!!
I did find that the front velocity stack where the breather hose pushes on was block from when it was made, I used a drill bit and the plug came right out.
Product Sleeve Dress shirt Grey Collar
Product Sleeve Dress shirt Grey Collar
 
1 - 3 of 3 Posts
Top