PAC connection
1 - 3 of 3 Posts
Joined
·
25 Posts
as you can see from the wiring diagram above, the PAC connector is powered by Accessory power (R/Y, or Red with yellow stripe for those new to wiring) and that is supplied by the BCM - hence we don't know what the real power rating is...
for the Daymaker lights, the wiring harness only uses two wires, the Accessory power and Ground - see picture below:
![]()
also if you're interested in getting a connector kit like that, I use auto-lick.co.uk quite successfully for one or two-of connectors.. here's there link to the required connector kit for the Molex 33481-0301
33481-0301
for £1.30 which includes terminals and seals...
![]()
hope this helps
Stephan
for the Daymaker lights, the wiring harness only uses two wires, the Accessory power and Ground - see picture below:
also if you're interested in getting a connector kit like that, I use auto-lick.co.uk quite successfully for one or two-of connectors.. here's there link to the required connector kit for the Molex 33481-0301
33481-0301
for £1.30 which includes terminals and seals...
hope this helps
Stephan
1 - 3 of 3 Posts
