Ahh OK, thats the connection under the seat where the Daymaker LED Auxiliary lighting harness (and switches) plugs into..
PAC connection
hi All,
anyone know what the PAC connector is? ..and where I can find it?
![]()
best
Stephan
anyone know what the PAC connector is? ..and where I can find it?
best
Stephan
1 - 3 of 3 Posts
2
as you can see from the wiring diagram above, the PAC connector is powered by Accessory power (R/Y, or Red with yellow stripe for those new to wiring) and that is supplied by the BCM - hence we don't know what the real power rating is...
for the Daymaker lights, the wiring harness only uses two wires, the Accessory power and Ground - see picture below:
![]()
also if you're interested in getting a connector kit like that, I use auto-lick.co.uk quite successfully for one or two-of connectors.. here's there link to the required connector kit for the Molex 33481-0301
33481-0301
for £1.30 which includes terminals and seals...
![]()
hope this helps
Stephan
for the Daymaker lights, the wiring harness only uses two wires, the Accessory power and Ground - see picture below:
also if you're interested in getting a connector kit like that, I use auto-lick.co.uk quite successfully for one or two-of connectors.. here's there link to the required connector kit for the Molex 33481-0301
33481-0301
for £1.30 which includes terminals and seals...
hope this helps
Stephan
1 - 3 of 3 Posts
