Harley Davidson Pan America Forum banner
1 - 17 of 17 Posts

·
Registered
Joined
·
27 Posts
Discussion Starter · #1 ·
I put 140 miles on my PAS this morning (300 total) and the wind buffeting noise was horrible! I'm 6'1" with the tall seat on the low setting. I also had to lean forward more than was comfortable on a long ride. So I stopped at the shop and bought the HD 22" windscreen and the bar risers. Much better! No distortion on top of the windscreen like the original either.
Tire Wheel Sky Cloud Automotive tire
Tire Wheel Sky Cloud Automotive tire
 

·
Registered
Joined
·
27 Posts
Discussion Starter · #5 ·
My mistake, you are correct. The stock was 16.5, and the new one 18. I just went and measured them. I had been looking at a 22" online and was confused 🤷‍♂️
Sorry about that!
 

·
Registered
'22 PAS Vivid Black
Joined
·
20 Posts
22" are hard to find! I wonder how well the aftermarket 22"s hold up - I figured once they get so long they stop holding shape at highway wind speeds. I do need a taller one. I am 5'10" and think the 18" should help with wind hitting my helmet.
 

·
Registered
Joined
·
27 Posts
Discussion Starter · #7 ·
When I put this 18 on I had it in the 3rd upright position and at 75 mph it moved a fair amount. I moved it to the top position where it lays back a bit and it smoothed right out. And no wind buffeting up to 85 mph.
 

·
Registered
Joined
·
19 Posts
22" are hard to find! I wonder how well the aftermarket 22"s hold up - I figured once they get so long they stop holding shape at highway wind speeds. I do need a taller one. I am 5'10" and think the 18" should help with wind hitting my helmet.
CalSci will make you a 22". I have their 20" and it works great, Road King level wind protection. I had planned on getting a PUIG or other adventure style shield when available in the aftermarket but have not been impressed with the looks of them so far. I'll stick with the CalSci for now.
 

·
Registered
Joined
·
45 Posts
I received two 17" dark grey tinted 7Jurock custom windshields for Christmas. At 5 10 , on the lowest position, top of shield is close to being even with my nose. Perfect..
Obviously, I don't need two windshields. I'm selling one, brand new for $100 including shipping.
 

·
Registered
'22 PAS Vivid Black
Joined
·
20 Posts
@Iron Butt Bob I tried to see what they looked like on their website, seems they took them down and I can't see them :(

Wonder why they took them down. Do you have a pic of one on yours? I am worried the tint is too dark to see through, especially in the evening/night.
 

·
Registered
Joined
·
45 Posts
@Iron Butt Bob I tried to see what they looked like on their website, seems they took them down and I can't see them :(

Wonder why they took them down. Do you have a pic of one on yours? I am worried the tint is too dark to see through, especially in the evening/night.
Couple of pictures. I haven’t done any night riding, but I look over the shield, so not anticipating any trouble.
 

Attachments

·
Registered
Joined
·
1 Posts
22" are hard to find! I wonder how well the aftermarket 22"s hold up - I figured once they get so long they stop holding shape at highway wind speeds. I do need a taller one. I am 5'10" and think the 18" should help with wind hitting my helmet.
I replaced the original screen with a Harley 18.5 inch screen, however it still obscures your view towards the top! Wish I had bought a taller Guvi one now or one of the other larger ones available! On the up side just had my first service and the software update included an update for the ‘Hold/Hill start ‘ to ‘22 spec so it only releases when you pull away not on for only 15 seconds or so…
 
1 - 17 of 17 Posts
Top