[Dirt-Baggerbro]

Just did my oil change on my PAS at 608 miles , my chain is at 3in. of slack on the center stand. Anybody know what the tq spec is on the 36mm axle nut for chain adjustment and then again for final tq? Thanks fellas ! I love this fukin bike!

 

[Nimda]

I’ve not got a workshop manual for this bike but I would guess between 95 and 100 Nm. Might be worth a call to the dealer and ask if it’s not listed in the owners manual.

 

[Patkin]

I had my first service yesterday, Tec told me it was 140nm. But please look for a second reference to confirm before relying on this. It does sound plausible for the diameter of thread but it’s a high number as far as I can see.

 

[Nimda]

It sounds a little high to me. But not that high as I would question it. The tech is probably right. but like you say no harm in getting it confirmed.

 

[Jvheli]

Just did my oil change on my PAS at 608 miles , my chain is at 3in. of slack on the center stand. Anybody know what the tq spec is on the 36mm axle nut for chain adjustment and then again for final tq? Thanks fellas ! I love this fukin bike!

3.	Tighten axle nut (3). Torque: 129–142 N·m (95–105 ft-lbs) Rear axle nut

 

[KnuckleHead]

3.	Tighten axle nut (3). Torque: 129–142 N·m (95–105 ft-lbs) Rear axle nut

Thanks for sharing this @Jvheli! Welcome to the forum! Do you have a Pan America?

 

[Jvheli]

Thanks for sharing this @Jvheli! Welcome to the forum! Do you have a Pan America?

Not yet. But I am very familiar with the bike. Maybe a ‘22

 

[Matt]

3.	Tighten axle nut (3). Torque: 129–142 N·m (95–105 ft-lbs) Rear axle nut

Bless you! 🙏🏼🙏🏼🙏🏼