Has anyone figured out how to turn on the off road lights (all four leds on each auxiliary light) on the 2024 Cvo pan America? Up to this point I figured out how to turn on the fogs and the driving lights but apparently there is an additional mode where all the lights come on. They show all three modes on the Harley sales video for the day maker aux lights.
Lighting help
1 reading
Cloudscapes01
1 - 10 of 10 Posts
Joined
·
2 Posts
Has anyone figured out how to turn on the off road lights (all four leds on each auxiliary light) on the 2024 Cvo pan America? Up to this point I figured out how to turn on the fogs and the driving lights but apparently there is an additional mode where all the lights come on. They show all three modes on the Harley sales video for the day maker aux lights.
Joined
·
28 Posts
I saw in another forum post that the 2024 model doesn’t let you run every single light but I don’t know that personally. The aux light manual says depending on the region they might not run fogs and high beams at the same time because of regional laws.
Joined
·
587 Posts
The dealer could not make the HD aux lights that came off my 21 special work on my 24 special, like they do on the CVO. When they swapped everything off the 21, Said something about a flash that was needed, that has not come out.
@roadrash83 In regards to getting the lights to work on the '24, were they or you able to hook up your old lights from the '21 in the same manner as they were using the handlebar mounted switch? Do you know what the exact purpose of the "flash" is that they referenced? I have the same issue coming up soon. I don't really care if I need to use my old switch on the bars, I may even prefer that since I don't run my lights all the time, just trying to figure out if it is possible. I'm assuming they tied in a standard CAN Bus lead that comes out to front area of tank that the new lights plug into so I'm wondering if I can unplug their lead and replace it with my old one which would power the harness to the lights and the lead up to the switch?
Ha...I just went looking in the forums just now for the sane exact question. I'm starting to think Harley outsmarted themselves going from the handlebar switch to the software "settings" command and forgot about the offroad 4 light/each mode. Which is so dumb because last I checked they sold me a bike with offroad capabilities. If there is a way put it in the manual Harley. Ugh. My dealer tech had no idea either. Give me the switch back!
Possible. However, I had a 2022 and got the auxiliary lights installed in the u.s and the Manuel switch that you got at that time had all options.
the dealer has access to the setting to keep the fog lights if the high beam is on. if you do that you will get both running and fog lights when high beam is used and just the fog lights in low beam mode. half hour service
I do not get it, in my settings I could only enable the fog lights and running lights are not an option. Dealer says that since the bike is Canadian, running lights may be locked by VIN number which is ridiculous. Did anyone had the same problem on their 24-25 bike?
Joined
·
20 Posts
Hi I have the same model as you , did you manage to find out how to get all four leds on the auxiliary lights to work?
My Harley Davidson dealership spent hours trying to figure out the settings, they've managed to enable or disable bottom lights, give the high beam is on. however, they found in a manual that running lights locked behind the win number and only available in US models.
1 - 10 of 10 Posts
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
