Harley Davidson Pan America Forum banner

Pan america won't start

32K views 30 replies 13 participants last post by  leroysch  
I've got 6500 miles on mine so far, this is the first time it's done this. I hope it was just a fluke, and doesn't do it again. If it does I'll take it in, until then I guess I'll just ride!!
Greetings ,
it's a real horror when the engine stalls , for what reason so ever , in heavy traffic while you're lane-splittin' and there's no way to re-start it immediately while you're trying to reach the roadside between trucks & cars passing you by both sides and your speed is rapidly slowing down to zero . :eek:🥶 I've had all the latest reflashes (ECM 3x , BCM 3x , EHCU 2x , LHCM & RHCM , recall 0631) . I've noticed improvement but still when the engine is really at cold temperature , it' starts but tempts to stall (doesn't) and then sets a few DTC's . There's still a lot of work to do on the electronics management ...
All the rest performs great . 😏
 
It did it again.
But what i remember, is that i turned it on and instantly I pushed the start Button. May be this causes the Problem.
Anyway after a few minutes the PSA started as usual. I went home for arround 45 km. During the ride it fellt okay but
In the Display was that gearbox sign.
In the Garage i tryed to delete the dtc and it works.
Starting as usual and the gearbox sign was off.
Strange, HD has to solve that behaviour.
.
ALWAYS WAIT (4sec) FOR STARTUP SCREEN TO END IT'S WOW-TEST . this is the time the electronic system takes for reading all parameters and set itself right for starting . Then start by just puching the start button without any other (throttle grip) manipulation to avoid system fault calculation . 😏